SOUNDS10 -koodilla 10 € alennus yli 100 € ostoksesta, SOUNDS20 -koodilla 20 € alennus yli 200 € ostoksesta, SOUNDS100 -koodilla 100 € alennus yli 1000 € ostoksesta

Marshall JVM 2266 50W Head (second hand)
Marshall JVM 2266 50W Head (second hand)
Marshall JVM 2266 50W Head (second hand)
  • Lataa kuva Galleria-katseluun, Marshall JVM 2266 50W Head (second hand)
  • Lataa kuva Galleria-katseluun, Marshall JVM 2266 50W Head (second hand)
  • Lataa kuva Galleria-katseluun, Marshall JVM 2266 50W Head (second hand)

Marshall JVM 2266 50W Head (second hand)

Normaalihinta
€890,00
Myyntihinta
€890,00
Normaalihinta
Tilapäisesti loppu
Yksikköhinta
kohti 
Tuotteiden lukumäärä varastossa: 1 kpl

Erittäin hyväkuntoinen käytetty Marshall JVM-nuppi. Toimii täydellisesti, tolexissa muutamia jälkiä, yleiskunto erittäin siisti. Ei jalkakytkintä mukana.

The Best Modern AND Vintage Marshall Tones in One Amp!

The Marshall 2266 Vintage Modern 50-watt all-tube amplifier head uses a single channel with a choice of two footswitchable "dynamic ranges." The Low range gives you the tone and gain of a stock vintage Marshall amp. The High range on the 2266 head adds an extra preamp tube to the signal path, providing some tasty classic rock tones. Go from sparkling chime to compressed overdrive with a tap of the footswitch, and add your favorite outboard effects to the signal path via a series effects loop (with level selector) built into the versatile 2266 head.

Marshall 2266 Vintage Modern 50-watt Amplifier Head at a Glance:

  • Flexible preamp with a classic power section
  • Master volume and reverb
  • Effects loop

Versatile preamp, classic power section
Two "frequency selective" preamp voicings (called Body and Detail) give you incredible tonal flexibility, while the power amplifier is based largely on the first Marshall amplifiers to be produced, with two KT66 output tubes yielding a fat and smooth tone. A mid-boost switch on the front panel fattens the tone even more while a taditional Marshall tone control circuit enables you to fine tune your sound.

Master volume and reverb
A master volume gives you the ability to manage this amp's output effectively at any venue. A reverb level control mixes the onboard "plate" reverb with the direct signal, so you can make the signal as "wet" or "dry" as you wish. The reverb is footswitchable for even more onstage flexibility.

Effects loop
The 2266 head includes a series effects loop so you can add outboard gear to your sound. Loop levels of -10dB and +4dB are selectable via a rear panel switch. You can completely bypass the effects loop also.

The Best Modern AND Vintage Marshall Tones in One Amp!

The Marshall 2266 Vintage Modern 50-watt all-tube amplifier head uses a single channel with a choice of two footswitchable "dynamic ranges." The Low range gives you the tone and gain of a stock vintage Marshall amp. The High range on the 2266 head adds an extra preamp tube to the signal path, providing some tasty classic rock tones. Go from sparkling chime to compressed overdrive with a tap of the footswitch, and add your favorite outboard effects to the signal path via a series effects loop (with level selector) built into the versatile 2266 head.

Marshall 2266 Vintage Modern 50-watt Amplifier Head at a Glance:

  • Flexible preamp with a classic power section
  • Master volume and reverb
  • Effects loop

Versatile preamp, classic power section
Two "frequency selective" preamp voicings (called Body and Detail) give you incredible tonal flexibility, while the power amplifier is based largely on the first Marshall amplifiers to be produced, with two KT66 output tubes yielding a fat and smooth tone. A mid-boost switch on the front panel fattens the tone even more while a taditional Marshall tone control circuit enables you to fine tune your sound.

Master volume and reverb
A master volume gives you the ability to manage this amp's output effectively at any venue. A reverb level control mixes the onboard "plate" reverb with the direct signal, so you can make the signal as "wet" or "dry" as you wish. The reverb is footswitchable for even more onstage flexibility.

Effects loop
The 2266 head includes a series effects loop so you can add outboard gear to your sound. Loop levels of -10dB and +4dB are selectable via a rear panel switch. You can completely bypass the effects loop also.

Marshall 2266 Vintage Modern 50-watt Amplifer Head Features:

  • Output: 50W
  • Preamp tubes: Four 12AX7/ECC83
  • Power amp tubes: Two KT66


 


Suomi
Suomi