Fulltone Fulldrive 2 V2 gives you two diferent overdrive and distortion sounds in one package. Two channels with their own volume and gain controls and plenty of clipping options. Full-Drive users include Nils Lofgren, John Petrucci (Dream Theater), Scott Henderson, Chris Shiflett and Pat Smear (Foo Fighters) and many others.
Volume: Master volume for the pedal.
Tone: Treble boost/cut control which affects both channels. The sound gets brighter towards 5 o'clock. Neutral at about 12-1 o'clock.
Drive 1: Sets the gain and sustain for channel 1. More gain and sustain towards 5 o'clock.
Drive 2: Sets the gain level of channel 2. Think of Drive 2 mode as an instantly available extension of Drive 1, allowing higher distortion and also higher volume than you have set with Drive 1.
Drive 2 Volume: Think of it as an extension to the Master Volume.. Drive 2 Volume is only functional when the Drive 2 footswitch is turned on and LED is lit, allowing you to go higher than where the Master Volume is set. You cannot go lower than what the Master volume is set to.
Left toggle switch: This 3-position mini switch gives you three different clipping options for both channels:
CC (Comp-Cut) bypasses all clipping diodes, leaving a mostly clean-boost that can get somewhat dirty sounding as the 4558 chip gets driven harder
Note; none of the modes on right toggle switch are audible when the left toggle is in CC position.
VIN (Vintage mode) is Normal diode clipping with strong midrange presentation.
FM (Flat-Mids) uses a proprietary feedback circuit that returns signal to the clipping section cancelling out some of the midrange content, creating a very open, natural sound.
Right toggle switch: Three additional clipping options for both channels:
WIDE implements a Mosfet & Schottky diode in each direction. Less Compressed, more open, more Bass.
HC (Half-Clipped) clips only the top part of the waveform, leaving bass notes solid and percussive, and higher notes signing with sustain. STD (Standard) same slightly asymmetrical diode clipping as on a vintage 90s Full-Drive. Softer, rounder, more compressed.
- Power Requirements: 2.1mm 9-18 VDC, 50 mA. Also works with a 9V battery.
- True Bypass
- Made in USA